Energy-efficient spray foam solutions for Aubrey, TX. Roofing, insulation, and coatings that reduce energy costs and extend roof life by decades.
Full-spectrum spray foam solutions for residential and commercial buildings in Aubrey, TX.
Waterproof your flat or low-slope roof with a spray-applied membrane system that eliminates the seam failures, flashing leaks, and ponding damage that plague conventional roofing. One seamless application. Permanent results.
Active roof leak? We locate the source using advanced detection methods, then repair it permanently at the root cause. No guesswork, no temporary patches — just lasting results backed by our workmanship warranty.
Stop metal roof leaks without replacement. Our elastomeric coating system treats rust, seals every fastener and seam, and creates a continuous waterproof membrane over your entire metal roof — backed by a manufacturer warranty.
Commercial roofs deteriorate from the surface down. If your structure and deck are sound, restoration with spray foam and silicone coating is the economically superior choice. We handle buildings from 5,000 to 500,000 square feet.
Upgrade your attic insulation from fiberglass or cellulose to spray foam and feel the difference the same day. SPF does not settle, sag, or leave gaps — it expands to fill every cavity and seals air leaks that other materials miss.
Spray foam roofs are built to last, but they do need occasional repair. Our crews fix bird pecks, foot traffic damage, hail impacts, and coating wear — extending the life of your SPF system without a costly full recoat.
Flat roofs fail at seams, flashings, and penetrations. Our crews specialize in diagnosing and repairing these critical failure points using spray foam, liquid-applied membranes, and targeted coating systems that outlast conventional patch repairs.
High-performance silicone roof coatings that resist ponding water, UV degradation, and extreme temperatures. Unlike acrylics, silicone does not re-emulsify in standing water — making it ideal for flat roofs with drainage challenges.
Comprehensive roof inspections using infrared moisture scanning, core sampling, and visual assessment. Detailed photo-documented reports with condition ratings, remaining life estimates, and prioritized repair recommendations.
When your roof is structurally sound but the surface is deteriorating, restoration is the smart investment. We clean, repair, and recoat your entire roof with a warranted system that performs like new at a fraction of replacement cost.
Protect your roofing investment with a maintenance program designed for your specific roof type. Our crews document every visit with photos and condition ratings so you always know the exact state of your roof.
Transform your building with a spray foam roof that insulates, waterproofs, and strengthens in a single application. No tear-off required over most existing substrates. Backed by manufacturer warranties and our own workmanship guarantee.
Transform your crawl space from a moisture liability into a conditioned, energy-efficient part of your building envelope. Spray foam eliminates condensation, prevents mold conditions, and dramatically improves floor comfort above.
Our replacement process is thorough: remove existing roofing to the deck, inspect and repair substrate, apply closed-cell SPF to specified thickness, and finish with a UV-protective coating. The result is a monolithic roof system with no seams to fail.
Hail, wind, and debris damage demand immediate attention and thorough documentation. Our crews respond quickly, document all damage with photos and measurements that satisfy insurance adjusters, and restore your roof completely.
Serving the growing city of Aubrey, TX, Lapolla Industries delivers the same spray foam roofing and insulation technology trusted by commercial and industrial facilities across the nation. Our Aubrey crews combine deep SPF expertise with local knowledge of Texas building codes and climate demands.
Whether you need a spray foam roof on your commercial building, silicone coating on your flat roof, or closed-cell insulation in your attic, Lapolla Industries brings the equipment, materials, and experience to do it right. Every project in Aubrey starts with a free inspection and ends with a warranty you can count on.
We are committed to delivering exceptional spray foam solutions that protect your biggest investment.
SPF roofing delivers the highest R-value per inch of any commercial insulation. Our customers typically see 20 to 40 percent reductions in heating and cooling costs after installation.
SPF roofing and coating can be applied over existing roof systems without tear-off — no demolition noise, no debris, and no business interruption during installation.
Lapolla Industries has been at the forefront of spray polyurethane foam technology since 2003 — with deep roots in SPF manufacturing and application that few competitors can match.
Every project starts with a no-obligation inspection using infrared moisture scanning and visual assessment. We identify every issue and provide an honest, transparent estimate.
No hidden fees, no surprise charges. You receive a detailed written estimate before we start and the final invoice matches — guaranteed. Every line item explained.
Answers to the most frequently asked spray foam questions from Aubrey property owners.
Closed-cell foam is denser, provides a higher R-value per inch (R-6.5 vs R-3.7), and acts as a vapor and moisture barrier. Open-cell foam is lighter, more flexible, and more affordable. For roofing applications in Aubrey we typically recommend closed-cell for its waterproofing properties. For interior wall insulation, either type may be appropriate.
Yes. Spray foam roofing provides the highest R-value per inch of any commercial roofing insulation — typically R-6.5 per inch. In Aubrey, this translates to significant cooling and heating savings because the seamless membrane eliminates air infiltration that accounts for up to 40 percent of energy loss in conventional roofs.
Yes. Spray foam applied to crawl space walls and rim joists creates an airtight moisture barrier that eliminates condensation, musty odors, and cold floors. For Aubrey homes with persistent crawl space moisture issues, closed-cell foam combined with vapor barrier encapsulation provides a permanent solution.
Spray foam is one of the best solutions for flat and low-slope roofs in Aubrey. The seamless application eliminates the seams and joints where conventional flat roof systems fail. SPF also self-levels to eliminate ponding water — one of the biggest causes of flat roof leaks and premature failure.
Spray foam insulation costs in Aubrey typically range from $1.50 to $3.50 per square foot for open-cell and $3.00 to $7.00 per square foot for closed-cell. The exact price depends on the area being insulated, foam thickness, and accessibility. Most Aubrey homeowners see a full return on investment through energy savings within 3 to 5 years.
Absolutely. SPF roofing performs exceptionally in both extremes because the closed-cell foam provides continuous insulation without thermal bridging. In hot Aubrey summers, the reflective coating reduces surface temperatures by up to 50 degrees. In winter, the insulation value keeps conditioned air inside.
See what our customers have to say about their experience with Lapolla Industries.
"When our TPO roof failed after only eight years we switched to spray foam for the replacement. The seamless application eliminates all the seam failures that plagued the old system. Three years in and it performs flawlessly."
"We manage a 40,000 square foot retail center and the roof was near end of life. Instead of tearing it off they restored it with a spray foam and coating system. Saved us over sixty percent versus replacement and added twenty years of life."
"Had spray foam applied to our crawl space walls and rim joists. The difference in floor temperature upstairs is dramatic. Our furnace cycles less and the energy savings paid for the project faster than they estimated."
Lapolla Industries proudly serves property owners in these cities near Aubrey.